- Brand New Glass 6MM ( SELECT OPTIONS FOR REQUIRED SIZES )
- Glue Less Finish
- Clear Quality Glass
- Leakage warranty - 8 years.
- Edge to Edge Finish
- Delivery charges applicable
- Installation Charges extra as per your requirement
Customer Reviews
About & Origin
A 2 foot glass aquarium built from 6mm glass, offered with a choice of exact size options at checkout, the same made-to-order approach as the 1 foot version in this range. Stepping up to 2 feet roughly doubles the footprint of a 1 foot tank, moving it from a strictly nano setup into genuine small-community-tank territory.
The listing notes glue-less, edge-to-edge silicone-sealed construction with a clear-glass finish, and mentions an 8-year leakage warranty -- a meaningful detail, since seam failure is the main long-term risk with any glass tank, and a multi-year warranty is a reasonable sign of confidence in the build quality and sealant used.
This size is a common choice for a first "real" community aquarium -- large enough to keep a small shoal of tetras or rasboras alongside some bottom dwellers and a few plants, without yet requiring the space, cost, or plumbing considerations of a 3-4 foot or larger tank.
As with the 1 foot version, this is bare glass only -- filter, heater, light, lid, and substrate are all separate purchases, and delivery/installation charges apply on top of the tank price depending on your location and requirements.
The stated 8-year leakage warranty is worth checking the exact terms of at purchase (what it covers, how to claim) -- but as a general signal, a multi-year warranty on seam integrity is a genuinely useful indicator that a manufacturer stands behind their silicone work, which is the single most common point of failure in any glass aquarium over time.
Requirements
2 feet is roughly 60cm; a typical proportioned tank at this length (around 60 × 30 × 30cm) holds approximately 54 litres gross, though your chosen size option may differ -- always compute length × width × height in cm, divide by 1000, and subtract roughly 10-15% for substrate and water-level headroom to estimate real usable volume.
At this size, expect the filled tank to weigh 55-60kg or more, so it needs a properly rated stand or piece of furniture, perfectly level, on solid flooring -- this is genuinely more important at 2 feet than at 1 foot, since the extra weight makes an unstable surface a real risk rather than just poor practice.
Budget for a filter sized to this volume (an internal or hang-on filter rated for roughly 50-70 litres), a heater if keeping tropical fish (75-100W is typical for this size in most home conditions), and a lid to prevent jumping and reduce evaporation. Keep it out of direct sunlight to limit algae growth and temperature swings.
Cycle the tank before stocking -- run the filter for one to two weeks, ideally seeded with established filter media or a bacterial starter, before adding fish gradually rather than all at once.
At this size, also think ahead about maintenance access -- a 2 foot tank is large enough that reaching the back corners for cleaning can be awkward if it's pushed flush against a wall on all sides; leaving a little access space on at least one side makes routine maintenance meaningfully easier.
Compatibility
Setup & Maintenance
A 2-foot tank is forgiving enough for a first community setup, provided the basics are followed:
- Placement: level, weight-rated stand, out of direct sun, away from doors/windows with big temperature swings
- Cycling: 1-2 weeks minimum before stocking, adding fish gradually over several weeks rather than all at once
- Water changes: 20-25% weekly is a reliable baseline once stocked, adjusted up if the tank is more heavily fed/stocked
- Filter maintenance: rinse media in removed tank water (never tap water, which kills the beneficial bacteria) every few weeks, not more often than needed
- Glass care: algae scraper/pad made for aquarium use, and periodic seam inspection at the corners for any sign of cloudiness or separation
- Substrate depth: 3-5cm is typical for a tank this size, more if you plan to keep root-feeding plants
- Stocking order: add hardier fish first over the initial few weeks, then more sensitive species once the tank has settled and parameters are stable
- Test kit: keep ammonia/nitrite/pH testing on hand, especially through the first month while the tank finds its biological balance
- Decor placement: arrange rocks/wood on the bare glass base or a protective mat rather than directly on substrate over glass, to avoid pressure points that can stress the panel over time
Kept up consistently, a well-built 2-foot tank like this is a solid long-term home for a proper small community setup.
